Kayayyaki

  • Fastener mara misali

    Fastener mara misali

    Na'urorin da ba daidai ba suna nufin na'urori waɗanda ba sa buƙatar dacewa da daidaitattun, wato, na'urorin da ba su da ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun bayanai, ana iya sarrafa su cikin yardar kaina kuma a daidaita su, yawanci ta abokin ciniki don gabatar da takamaiman buƙatu, sannan ta hanyar Mai ƙera fastener Dangane da waɗannan bayanai da bayanai, farashin masana'anta na na'urorin da ba daidai ba gabaɗaya ya fi na daidaitattun kayan ɗamara.Akwai nau'ikan maɗauran ma'auni da yawa.Saboda wannan sifa ta na'urorin da ba daidai ba ne ya sa yana da wahala ga ma'aunin ma'auni don samun daidaitattun rarrabuwa.
    Babban bambanci tsakanin ma'auni na ma'auni da na'urorin da ba daidai ba shine ko an daidaita su.Tsarin, girman, hanyar zane, da sa alama na madaidaicin manne suna da tsauraran matakan da jihar ta gindaya.Sassan (Sassan), na yau da kullun daidaitattun madaidaicin sassa ne masu zare, maɓalli, fil, birai masu birgima da sauransu.
    Abubuwan da ba daidai ba sun bambanta ga kowane mold.ɓangarorin da ke kan ƙirar da ke hulɗa da matakin manne samfur gabaɗaya sassan da ba daidai ba ne.Babban su ne ƙirar gaba, ƙirar baya, da sakawa.Hakanan ana iya cewa baya ga screws, spouts, thimbles, aprons, springs, da mold blanks, kusan dukkansu ba daidai ba ne.Idan kuna son siyan kayan haɗin da ba daidai ba, yakamata ku samar da shigarwar ƙira gabaɗaya kamar ƙayyadaddun fasaha, zane-zane da zayyana, kuma mai siyarwa zai kimanta wahalar waɗanda ba daidai ba bisa ga wannan, da ƙima na farko na samar da abubuwan da ba daidai ba. fasteners.Kudin, tsari, zagayowar samarwa, da sauransu.

     

  • Karusa Bolt/Bolt Koci/ Mai zagaye-kai square-wuyan angwaye

    Karusa Bolt/Bolt Koci/ Mai zagaye-kai square-wuyan angwaye

    abin hawa

    Kullin karusar (wanda kuma ake kira bolt koci da zagaye-kai square-wuyan kusoshi) wani nau'i ne na ƙulle-ƙulle da ake amfani da shi don ɗaure ƙarfe zuwa ƙarfe ko, galibi, itace zuwa ƙarfe.Har ila yau, an san shi da abin rufe fuska na kofin a Australia da New Zealand.

     

    An bambanta shi da sauran kusoshi ta wurin kan naman kaza marar zurfi da kuma gaskiyar cewa ɓangaren giciye na shank, ko da yake madauwari ga mafi yawan tsawonsa (kamar yadda yake a cikin sauran nau'o'in gunki), yana da murabba'i a ƙarƙashin kai nan da nan.Wannan yana sanya kullin kulle kansa lokacin da aka sanya shi ta rami mai murabba'i a cikin madaurin karfe.Wannan yana ba da damar shigar da fastener tare da kayan aiki ɗaya kawai, spanner ko wrench, yana aiki daga gefe ɗaya.Shugaban kullin abin hawa yakan kasance kubba mara zurfi.Shank ba shi da zaren;kuma diamita ya yi daidai da gefen filin giciye.

    An ƙirƙiro kullin karusar don amfani da farantin ƙarfe na ƙarfafa ƙarfe a kowane gefen katako na katako, yanki mai murabba'i na ƙugiya wanda ya dace da rami murabba'i a cikin aikin ƙarfe.Ya zama ruwan dare a yi amfani da kullin karusar zuwa katako, sashin murabba'in yana ba da isasshen ƙarfi don hana juyawa.

     

    Ana amfani da kullin karusar da yawa wajen gyare-gyaren tsaro, kamar makullai da hinges, inda za a iya cire kullin daga gefe ɗaya kawai.Santsin kai mai santsi da goro da ke ƙasa suna hana buɗe murfin karusar daga gefen rashin tsaro.

  • NYLON NUT

    NYLON NUT

    Nyloc goro, wanda kuma ake magana da shi azaman goro na kulle saka nailan, ƙwayar ƙwayar cuta ta polymer-insert, ko goro tasha, wani nau'i ne na kulle-kulle tare da abin wuya na nailan wanda ke ƙara juzu'i akan zaren dunƙulewa.

     

  • Flat Washer

    Flat Washer

    Washer galibi yana nufin:

     

    Washer (hardware), faranti na bakin ciki galibi mai siffa mai siffa tare da rami a tsakiya galibi ana amfani da shi tare da bolt ko goro.

  • Sanda mai zare

    Sanda mai zare

    DIN975,Sanda mai zare, wanda kuma aka sani da ingarma, sanda ce mai tsayi da yawa wadda ake zaren a gefen biyu;Zaren na iya tsawaita tare da cikakken tsawon sandar.An tsara su don amfani da su a cikin tashin hankali. Sanda mai zare a cikin sigar hannun jari ana kiransa duk-zaren.

    1. Abu: Carbon Karfe Q195, Q235, 35K, 45K, B7, SS304 , SS316
    2. Daraja: 4.8,8.8,10.8, 12.9;2, 5, 8, 10, A2, A4
    3. GIRMA: M3-M64, tsawon daga mita daya zuwa mita uku
    4. Standard: DIN975/DIN976/ANSI/ASTM

  • Long Hex Nut/ Haɗin Haɗin Gyada DIN6334

    Long Hex Nut/ Haɗin Haɗin Gyada DIN6334

    STYLE Dogon Hex Nut
    STANDARD DIN 6334
    GIRMA M6-M36
    CLASS : 4,6,8,10,12;SS : SS304,SS316
    Rufi (Carbon karfe) baki, tutiya, HDG, Heat magani, Dacromet, GEOMET
    KYAUTATA Carbon Karfe, Bakin Karfe
    KYAUTA da yawa/kwalaye a cikin kwali, yawa a cikin jakunkuna/buket, da sauransu.
    PALLET m katako pallet, plywood pallet, ton akwatin/jakar, da dai sauransu.

  • DIN6914/A325/A490 Heavy hex structural bolt

    DIN6914/A325/A490 Heavy hex structural bolt

    Sunan samfur DIN6914/A325/A490 Heavy hex structural bolt

    Standard DIN,ASTM/ANSI JIS EN ISO,AS,GB

    Karfe Grade: DIN: Gr.8S 10S, A325, A490, A325M, A490M DIN6914

    Ƙarshen ZP, Hop Dip Galvanized(HDG), Black Oxide,

  • Carbon Karfe Black DIN934 Hex Nut

    Carbon Karfe Black DIN934 Hex Nut

    Carbon Karfe Black DIN934 Hex Nut

    Karfe Grade: DIN: Gr.4.6, 4.8, 5.6, 5.8, 8.8, 10.9, 12.9;SAE: Gr.2, 5, 8;

    Ƙarshen Zinc (Yellow, White, Blue) black oxide, Black Hop Dip Galvanized(HDG), Black Oxide,
    Geomet, Dacroment, anodization, Nickel plated, Zinc-Nickel plated

     

     

  • Grade4/8/10 DIN934 Electric Galvanized Hex Nut

    Grade4/8/10 DIN934 Electric Galvanized Hex Nut

    Standard DIN, ASTM/ANSI JIS EN ISO, AS, GB
    Karfe Grade: DIN: Gr.4.6, 4.8, 5.6, 5.8, 8.8, 10.9, 12.9;SAE: Gr.2, 5, 8;
    Ƙarshen Zinc (Yellow, White, Blue) Black oxide, Black Hop Dip Galvanized(HDG), Black Oxide, Geomet, Dacroment, anodization, Nickel plated, Zinc-Nickel plated
    Tsarin Samar da M2-M30: Cold Froging, M30-M100 Hot Forging, Machining da CNC don Maɓalli na Musamman

  • UNC/ASME B18.2.2 Hex Nut

    UNC/ASME B18.2.2 Hex Nut

    Standard DIN, ASTM/ANSI JIS EN ISO, AS, GB
    Matsayin Karfe: 4/6/10/12 SAE: Gr.2, 5, 8;
    Ƙarshen Zinc (Yellow, White, Blue, Black), Hop Dip Galvanized (HDG), Black Oxide, Geomet, Dacroment, anodization, Nickel plated, Zinc-Nickel plated

     

     

  • DIN 933/DIN931Black Grade 8.8 Hex Head Bolt

    DIN 933/DIN931Black Grade 8.8 Hex Head Bolt

    Sunan samfurin Black Grade 8.8 DIN 933 / DIN931 Hex Head Bolt

    Standard DIN,ASTM/ANSI JIS EN ISO,AS,GB
    Girman Karfe: DIN: Gr.4.6,4.8,5.6,5.8,8.8,10.9,12.9;SAE: Gr.2,5,8;
    ASTM: 307A, A325, A490,

  • DIN933/DIN931 Zinc Plated Hex Bolt

    DIN933/DIN931 Zinc Plated Hex Bolt

    Sunan samfurin DIN933 DIN931 Zinc Plated Hex Bolt/Hex Cap Screw
    Standard: DIN, ASTM/ANSI JIS EN ISO, AS, GB
    Karfe Grade: DIN: Gr.4.6, 4.8, 5.6, 5.8, 8.8, 10.9, 12.9;SAE: Gr.2, 5, 8;
    ASTM: 307A, A325, A490

12Na gaba >>> Shafi na 1/2